|
| |
Recent Publications / Presentations
 | Rotomolding's Low-Cost-Effectiveness, SPE TOPCON, Independence,
Ohio 13th April 2010 |
| Notes from the Road 13, RotoWorld
Magazine, January-February 2010, Volume VI, Issue 1 |
| How Much Control Do We Need?, RotoWorld Magazine, January-February
2010, Volume VI, Issue 1 |
| Notes from the Road 12, RotoWorld
Magazine, November-December 2009, Volume V, Issue 6 |
| Notes from the Road 11, RotoWorld
Magazine, September-October 2009, Volume V, Issue 5 |
| From Crowbars to Thermocouples (with Prof. Roy Crawford), ARM
International Fall Meeting, Minneapolis, Minnesota, 27th September 2009 |
| Notes from the Road 10, RotoWorld
Magazine, July-August 2009, Volume V, Issue 4 |
| Notes from the Road 9, RotoWorld
Magazine, May-June 2009, Volume V, Issue 3 |
| Notes from the Road 8, RotoWorld
Magazine, March-April 2009, Volume V, Issue 2 |
| Notes from the Road 7, RotoWorld
Magazine, January-February, Volume V, Issue 1 |
| Notes from the Road 6, RotoWorld
Magazine, September-October 2008, Volume IV, Issue 6 |
| The Ultimate Cycle, ARM International Annual Fall Meeting, Chicago,
Illinois, 22nd October 2008 |
| Notes from the Road 5, RotoWorld
Magazine, September-October 2008, Volume IV, Issue 5 |
| The Perfect Cycle, ARMO Global Conference, Belfast, Northern
Ireland, 9th September 2008 |
| Notes from the Road 4, RotoWorld
Magazine, July-August 2008, Volume IV, Issue 4 |
| Notes from the Road 3, RotoWorld
Magazine, May-June 2008, Volume IV, Issue 3 |
| Notes from the Road 2, RotoWorld
Magazine, March-April 2008, Volume IV, Issue 2 |
| Notes from the Road 1, RotoWorld
Magazine, January-February 2008, Volume IV, Issue 1 |
| Rotomolding - Where in the World are We Going?, ARM International Annual
Fall Meeting, Detroit, Michigan, 10th October 2007 |
| 10 More Ways to Save 10% in Rotomolding,
ARM International 31st Annual Fall Meeting, Washington D.C, USA, 7th
November 2006 |
| Rotomoulding Flatness and Shrinkage,
ARMO Global Conference, Berlin, Germany, 18th September 2006 |
| 10 Ways to Save 10% in Rotomolding,
ARM International 28th Annual Spring Meeting, Orlando, Florida, March 14th,
2005 |
| ARMO-ARMI, December 2004 |
| Rotomo(u)lding Around the World, 3rd Pan
European Conference, Rome, Italy, March 22nd 2004 |
| Lean Manufacturing, 3rd Pan European
Conference, Rome, Italy, March 23rd 2004 |
| Rotomo(u)lding Around the World, ARM
International 28th Fall Meeting, Kansas City, Missouri, 4th November 2003 |
| ARMSA Conference - May 2003, Rotation
Magazine, Issue 4, June 2003 |
| Rotational Moulding in Asia, Plastics and
Rubber Asia, March 2003 |
| Rotolean - Lean Manufacturing for Rotational
Molding, ARM Fall Conference, Toronto, Canada, October 9, 2002 |
| Rotational Molding's Pursuit of Perfection, Rotation
Magazine, June 2002 |
| Rotomolding's Pursuit of Perfection, 2nd Pan
European Conference, Paris, France, May 7, 2002 |
| Practical Aspects of Rotational Molding, Polymer Training, Ltd.,
Telford, UK, April 24, 2002 |
| Practical Aspects of Rotational Molding, ARM Training Event,
Lacrosse, Wisconsin, April 8, 2002 |
| Rotomolding the Future - Can We Shape it?, Rotation
Magazine, November-December 2001 |
| Practical Aspects of Rotational Molding, ARM Training Event,
Cleveland, Ohio, December 3, 2001 |
| ARMSA, Rotomolding Out of Africa, Rotation Magazine,
July-August, 2001 |
| Using Infrared Thermometry for Process Control in Rotational Molding,
ARMSA Annual Conference, Johannesburg, South Africa, May 16, 2001 |
| Economics of Rotomolding, ARMSA Annual Conference,
Johannesburg, South Africa, May 17, 2001 |
| Rotational Molding Seminar, ARMSA Annual Conference,
Johannesburg, South Africa, May 18, 2001 |
| Cooling and Misting Workshop, ARM Spring Conference, San
Diego, March 19, 2001 |
| The Use of Infrared Thermometry for Process Control in Rotational
Molding, Pan European Conference, Brussels, Belgium, November 18,
2000 |
Other Articles
Ambient Temperatures - as a follow up to
discussions at the Yahoo! group, processing conditions and
their effect on rotomolded parts, January 2002.
A Semi-Automatic Rotational Molding Machine -
ARM Fall Meeting, Atlanta, Georgia, October 2000.
Next Steps in Machine Control for Rotational Molding
- Rotation
Magazine, Fall 1998
Venting - a paper reviewing the theory and some
of the practical issues concerning vents.
Shrinkage and Warpage - A short extract from
Rotational Molding: A Practical Guide outlining the variables that affect the
final shape of a part. Details on the range of shrinkage that can be expected
for a range of materials and how some of the parameters that affect them can be
controlled.
Automatic Mold Handling - Persico SpA, Italy is
working on several systems for assisting with mold handling and servicing.
Moving towards a fully automatic rotational molding process?
Hand-Held Cure Device - Using ultrasonics to
detect the level of cure in rotomolded parts appears to be possible. Is anyone
interested in such a device coming to market?
PE Compound - Mold in Graphics have developed a
new way of forming those hard to fill sections on rotomolded parts. Take a look
at their new pliable PE compound that can be used to form flanges or solid areas
in molded parts.
Automation Concept - Presents an extract from a
presentation outlining some concepts on handling individual molds for an
automatic mold handling system. An extension of the MES system developed by
Persico, SpA.
Machine Output 1 - Studies output rates from a
turret machine, a 3-arm 5-station independent and a 4-arm 5-station independent
machine. Analyzes why a 4-arm 5-station machine does not function properly as
cycle imbalances grow.
Machine Output 2 - Compares production rates of
shuttle machines and carousel machines. Examines the flexibility of two double
shuttle machines vs. a four arm carousel for cycles that vary significantly.
|
